Added spartan 6 example

Signed-off-by: Joppe Blondel <joppe@blondel.nl>

examples/spartan6/.gitignore

@@ -0,0 +1,2 @@
+OUT
+.build

examples/spartan6/CON/toplevel.ucf

@@ -0,0 +1,41 @@
+NET "ACLK" LOC = P126;
+NET "ACLK" TNM_NET = "SYS_CLK_PIN";
+TIMESPEC TS_SYS_CLK_PIN = PERIOD "SYS_CLK_PIN" 10 ns HIGH 50 %;
+
+NET "LED[0]" LOC = P119;
+NET "LED[0]" IOSTANDARD = LVCMOS33;
+NET "LED[0]" DRIVE = 8;
+NET "LED[1]" LOC = P118;
+NET "LED[1]" IOSTANDARD = LVCMOS33;
+NET "LED[1]" DRIVE = 8;
+NET "LED[2]" LOC = P117;
+NET "LED[2]" IOSTANDARD = LVCMOS33;
+NET "LED[2]" DRIVE = 8;
+NET "LED[3]" LOC = P116;
+NET "LED[3]" IOSTANDARD = LVCMOS33;
+NET "LED[3]" DRIVE = 8;
+NET "LED[4]" LOC = P115;
+NET "LED[4]" IOSTANDARD = LVCMOS33;
+NET "LED[4]" DRIVE = 8;
+NET "LED[5]" LOC = P114;
+NET "LED[5]" IOSTANDARD = LVCMOS33;
+NET "LED[5]" DRIVE = 8;
+NET "LED[6]" LOC = P112;
+NET "LED[6]" IOSTANDARD = LVCMOS33;
+NET "LED[6]" DRIVE = 8;
+NET "LED[7]" LOC = P111;
+NET "LED[7]" IOSTANDARD = LVCMOS33;
+NET "LED[7]" DRIVE = 8;
+
+NET "SW[0]" LOC = P124;
+NET "SW[0]" IOSTANDARD = LVCMOS33;
+NET "SW[0]" PULLUP;
+NET "SW[1]" LOC = P123;
+NET "SW[1]" IOSTANDARD = LVCMOS33;
+NET "SW[1]" PULLUP;
+NET "SW[2]" LOC = P121;
+NET "SW[2]" IOSTANDARD = LVCMOS33;
+NET "SW[2]" PULLUP;
+NET "SW[3]" LOC = P120;
+NET "SW[3]" IOSTANDARD = LVCMOS33;
+NET "SW[3]" PULLUP;

examples/spartan6/README.md

@@ -0,0 +1,5 @@
+# Spartan 6 example
+
+Run full toolchain: `remotesyn -l all total`
+Run simulation: `remotesyn -l sim presim_total`
+Run post-simulation (after synthesis and implementation): `remotesyn -l sim postsim_total`

examples/spartan6/RTL/toplevel.vhd

@@ -0,0 +1,28 @@
+library IEEE;
+use IEEE.STD_LOGIC_1164.all;
+use IEEE.NUMERIC_STD.all;
+
+entity toplevel is
+    port (
+        ACLK : in std_logic;
+        LED  : out std_logic_vector(7 downto 0);
+        SW   : in std_logic_vector(3 downto 0)
+    );
+end toplevel;
+
+architecture structural of toplevel is
+    signal ARESETN : std_logic;
+begin
+
+    ARESETN <= SW(3);
+
+    process(ACLK, ARESETN)
+    begin
+        if ARESETN='0' then
+            LED <= "11111111";
+        elsif rising_edge(ACLK) then
+            LED <= SW & SW;
+        end if;
+    end process;
+
+end architecture;

examples/spartan6/SIM/tb_toplevel.vhd

@@ -0,0 +1,49 @@
+library IEEE;
+use IEEE.STD_LOGIC_1164.all;
+use IEEE.NUMERIC_STD.all;
+
+entity tb_toplevel is
+end entity;
+
+architecture behavioural of tb_toplevel is
+
+    -- COMPONENTS
+    -- ----------
+    component toplevel is
+        port (
+            ACLK    : in std_logic;
+            LED : out std_logic_vector(7 downto 0);
+            SW : in std_logic_vector(3 downto 0)
+        );
+    end component;
+
+    -- SIGNALS
+    -- -------
+    signal ACLK : std_logic := '0';
+    signal LED : std_logic_vector(7 downto 0) := "00000000";
+    signal SW : std_logic_vector(3 downto 0) := "0111";
+
+begin
+
+    c_toplevel : component toplevel port map(
+        ACLK, LED, SW
+    );
+
+    ACLK <= not ACLK after 10 ns;
+    SW(3) <= '1' after 150 ns;
+
+    process
+    begin
+        wait until SW(3)='1';
+
+        SW(2 downto 0) <= "101";
+        wait for 75 ns;
+        SW(2 downto 0) <= "010";
+        wait for 19 ns;
+        SW(2 downto 0) <= "111";
+
+        wait for 100 ns;
+        report "END OF SIMULATION" severity failure;
+    end process;
+
+end architecture;

examples/spartan6/project.cfg

@@ -0,0 +1,58 @@
+# PROJECT SETTINGS
+# ----------------
+[server]
+hostname = localhost
+port = 8080
+privkey = keys/id_rsa
+pubkey = keys/id_rsa.pub
+
+[project]
+# Toolchain selection. choose between [ISE, VIVADO]
+toolchain = ISE
+out_dir = OUT
+
+[target]
+family = spartan6
+device = xc6slx9
+package = tqg144
+speedgrade = -2
+
+# HARDWARE TARGETS
+# ----------------
+[total]
+src_vhdl = RTL/toplevel.vhd
+src_verilog = 
+src_sysverilog = 
+src_constraints = CON/toplevel.ucf
+src_ip = 
+toplevel = toplevel
+extra_options = xst -glob_opt max_delay -opt_mode speed
+                netgen -ism
+                map -ol high -xe n
+                par -ol high -xe n
+                trce -v 3 -s 2 -n 3 -fastpaths
+
+# SIMULATION TARGETS
+# ------------------
+[presim_total]
+simtype             = presim
+src_vhdl            = RTL/toplevel.vhd
+                      SIM/tb_toplevel.vhd
+src_verilog         = 
+src_sysverilog      =
+toplevel            = tb_toplevel
+runtime             = all
+levels              = 10
+
+[postsim_total]
+simtype             = postsim
+src_vhdl            = SIM/tb_toplevel.vhd
+src_verilog         = OUT/total/total.map.v
+src_sysverilog      =
+src_ip              = 
+src_sdf             = OUT/total/total.map.sdf
+toplevel            = tb_toplevel
+runtime             = all
+delay               = max
+sdfroot             = /tb_toplevel/c_toplevel
+levels              = 10

scripts/remotesyn

@@ -202,9 +202,10 @@ if __name__=="__main__":
                     f.write("# ----------------\n")
                     f.write("[server]\nhostname = localhost\nport = 8080\nprivkey = keys/id_rsa\npubkey = keys/id_rsa.pub\n\n")
                     f.write("[project]\n# Toolchain selection. choose between [ISE, VIVADO]\ntoolchain = ISE\nout_dir = OUT\n\n")
-                    f.write("[target]\nfamily = spartan6\ndevice = xc6lsx9\npackage = tgq144\nspeedgrade = -2\n\n")
+                    f.write("[target]\nfamily = spartan6\ndevice = xc6slx9\npackage = tqg144\nspeedgrade = -2\n\n")
                     f.write("# HARDWARE TARGETS\n")
                     f.write("# ----------------\n")
+                    f.write("[total]\n")
                     f.write("src_vhdl = RTL/toplevel.vhd\nsrc_verilog = \nsrc_sysverilog = \n")
                     f.write("src_constraints = CON/toplevel.ucf\nsrc_ip = \ntoplevel = toplevel\nextra_options = ")
                 exit(1)