Added everything from the other system

cores/wb/wb_timer/rtl/wb_timer.v

@@ -0,0 +1,74 @@
+`timescale 1ns/1ps
+
+module wb_countdown_timer #(
+    parameter WIDTH   = 32,  // counter width (<=32 makes bus mapping easy)
+    parameter DIVIDER = 0    // optional prescaler: tick every 2^DIVIDER cycles
+)(
+    input  wire         i_clk,
+    input  wire         i_rst,
+    output reg          o_irq,
+
+    input  wire [31:0]  i_wb_dat,
+    output reg  [31:0]  o_wb_dat,
+    input  wire         i_wb_we,
+    input  wire         i_wb_cyc,
+    input  wire         i_wb_stb,
+    output wire         o_wb_ack
+);
+
+    // One-cycle acknowledge on any valid WB access
+    // (classic, zero-wait-state peripheral)
+    assign o_wb_ack = i_wb_cyc & i_wb_stb;
+
+    // Internal countdown and prescaler
+    reg [WIDTH-1:0] counter;
+    reg [DIVIDER:0] presc;   // enough bits to count up to 2^DIVIDER-1
+    wire tick = (DIVIDER == 0) ? 1'b1 : (presc[DIVIDER] == 1'b1);
+
+    // Readback: expose the current counter value
+    always @(*) begin
+        o_wb_dat = 32'd0;
+        o_wb_dat[WIDTH-1:0] = counter;
+    end
+
+    // Main logic
+    always @(posedge i_clk) begin
+        if (i_rst) begin
+            counter <= {WIDTH{1'b0}};
+            presc   <= { (DIVIDER+1){1'b0} };
+            o_irq   <= 1'b0;
+        end else begin
+            // Default prescaler behavior
+            if (DIVIDER != 0) begin
+                if (counter != 0 && !o_irq)
+                    presc <= presc + 1'b1;
+                else
+                    presc <= { (DIVIDER+1){1'b0} };
+            end
+
+            // Wishbone write: load counter and clear IRQ
+            if (o_wb_ack && i_wb_we) begin
+                counter <= i_wb_dat[WIDTH-1:0];
+                o_irq   <= 1'b0;
+
+                // reset prescaler on (re)start or stop
+                presc   <= { (DIVIDER+1){1'b0} };
+
+            end else begin
+                // Countdown when running (counter>0), not already IRQ'd
+                if (!o_irq && counter != 0) begin
+                    if (tick) begin
+                        if (counter == 1) begin
+                            counter <= {WIDTH{1'b0}};
+                            o_irq   <= 1'b1; // sticky until next write
+                            presc   <= { (DIVIDER+1){1'b0} };
+                        end else begin
+                            counter <= counter - 1'b1;
+                        end
+                    end
+                end
+            end
+        end
+    end
+
+endmodule